OD Planet to Prevent Spline Wipeout

 

Press a 350 babbit tailbushing into the overdrive support shaft.Press it down till it's aprox in the middle (it's not picky). Then chuck the OD Planet up in the lathe, it's best if you use a old OD Support Splined Shaft that's been cutoff to ensure it's running straight, then machine diameter as seen in Image # 3 down to 1.494. That's It! Simple, Easy to Do

Image # 1

(click on image for larger display)

Image # 2

(click on image for larger display)

Image # 3

(click on image for larger display)

 

For more Interesting Idea's or if you have something you would like to see or add to these pages

email me at the link below.